User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 Video Configuration
- 3.3.3 PCH-FW Configuration
- 3.3.4 Trusted Computing
- 3.3.5 CPU Configuration
- 3.3.6 Graphic Configuration
- 3.3.7 PCI Express Configuration
- 3.3.8 SATA And RST Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 Power Management
- 3.3.13 Super IO Configuration
- 3.3.14 Serial Console Redirection
- 3.3.15 Miscellaneous
- 3.3.16 Realtek PCIe GBE Family Controller (MAC:00:E0:4C:68:00:0B)
- 3.3.17 APM Configuration
- 3.3.18 EZ-Flash
- 3.3.19 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
N5105I-IM-A R2.0
1-2
1.3 Specications
(continued on the next page)
CPU
Built-in Intel
®
Celeron
®
Quad-Core N5105 SoC onboard
Processors (Jasper Lake)
Memory
2 x SODIMM, max.32GB, DDR4 2933/2666/2400/2133 MHz Non-
ECC, Unbuffered Memory
Graphics
Integrated graphics processor - Intel
®
HD Graphics support
- Supports VGA output with a maximum resolution of 1920 x
1200 @ 60Hz
- Supports HDMI
®
output with a maximum resolution of 4096 x
2160 @ 24Hz
- Supports LVDS output with a maximum resolution of 1920 x
1200 @ 60Hz (Optional BOM colay with eDP)
Supports up to three displays simultaneously
Expansion slots
1 x PCI Express 3.0/2.0 x1 slot
1 x mini PCIe (supports PCIex1 / USB 2.0 mode) (w/ SIM holder)
Storage 2 x SATA Gen 3.0, up to 6Gb/s ports
Ethernet
1 x Realtek
®
8111H, supports WOL/PXE
Audio Realtek
®
ALC897 High Denition Audio
Rear panel I/O
ports
1 x VGA port
1 x HDMI
®
port
4 x USB 3.2 Gen 1 ports
1 x LAN (RJ45) port
1 x RJ11 port for cash drawer, 12/24V switched by jumper
3 x COM ports (1 x RS232/422/485, 2 x RS232 5/12/Ring,
switched by BIOS)
2 x Audio jacks
1 x 12V DC-IN lockable jack
Internal
Connectors
3 x COM Port headers (RS232: Ring/5V/12V Select, switched by
jumper) (Please keep your device voltage at around +/- 12V)
1 x Chassis Fan header (PWM Mode)
1 x Chassis Intrusion header
1 x Front Panel Audio header (AAFP)
1 x System panel header (10-1 pin)
1 x Clear CMOS header
1 x LVDS signal header
2 x USB 2.0 headers support additional 4 USB 2.0 ports
1 x 8-bit DIO header
1 x 4-pin ATX DC Power output connector
1 x 4-pin ATX DC Power input connector (DC-IN mode)
2 x SATA ports
2 x SATA Power connectors
1 x PS/2 keyboard and mouse header
1 x Speaker header