User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 Video Configuration
- 3.3.3 PCH-FW Configuration
- 3.3.4 Trusted Computing
- 3.3.5 CPU Configuration
- 3.3.6 Graphic Configuration
- 3.3.7 PCI Express Configuration
- 3.3.8 SATA And RST Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 Power Management
- 3.3.13 Super IO Configuration
- 3.3.14 Serial Console Redirection
- 3.3.15 Miscellaneous
- 3.3.16 Realtek PCIe GBE Family Controller (MAC:00:E0:4C:68:00:0B)
- 3.3.17 APM Configuration
- 3.3.18 EZ-Flash
- 3.3.19 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-16
N5105I-IM-A R2.0
Power On By RTC
Allows you to select whether to enable Wake Up on Alarm, to turn on your system
on a specied day of the month or week, or daily. Conguration options: [Disabled]
[Single event] [Daily event] [Weekly event] [Monthly event]
3.3.18 EZ-Flash
Enter Ez-Flash mode
This item allows you to run EzFlash utility. When you press <Enter>, a conrmation
message appears. Use the left/right arrow key to select between [Yes] or [No],
then press <Enter> to conrm your choice.
3.3.19 Watchdog Timer
Watchdog Support
This item allows you to enable or disable Watchdog timer. Conguration options:
[Enabled] [Disabled]
The following items appear when you set Watchdog Support to [Enable].
Watchdog Count mode
Allows you to select Watchdog Timer I count mode. Conguration options: [Second
Mode] [Minute Mode]
Watchdog Timer
Use the <+> and <-> keys to adjust the value or input the desired value directly.
The value ranges from 1 to 255.