User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 Video Configuration
- 3.3.3 PCH-FW Configuration
- 3.3.4 Trusted Computing
- 3.3.5 CPU Configuration
- 3.3.6 Graphic Configuration
- 3.3.7 PCI Express Configuration
- 3.3.8 SATA And RST Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 Power Management
- 3.3.13 Super IO Configuration
- 3.3.14 Serial Console Redirection
- 3.3.15 Miscellaneous
- 3.3.16 Realtek PCIe GBE Family Controller (MAC:00:E0:4C:68:00:0B)
- 3.3.17 APM Configuration
- 3.3.18 EZ-Flash
- 3.3.19 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-13
Chapter 3: BIOS setup
SerialPort2/3Conguration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[Disabled] [Enabled]
RI# Pin Function
Allows you to select the voltage offset. Conguration options: [Ring] [+5V]
[+12V]
SerialPort4/5/6Conguration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[Disabled] [Enabled]
ParallelPortConguration
Allows you to set parameters of parallel port.
Parallel Port
Allows you to enable or disable the parallel port (LPT/LPTE).Conguration
options: [Disabled] [Enabled]
The following item appears only when you set Serial Port to [Enabled].
Device Mode
This item allows you to change the Printer Port mode.
Conguration options: [STD Printer Mode] [SPP Mode] [EPP-1.9 and SPP
Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and EPP 1.9 Mode] [ECP
and EPP 1.7 Mode]