User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 Video Configuration
- 3.3.3 PCH-FW Configuration
- 3.3.4 Trusted Computing
- 3.3.5 CPU Configuration
- 3.3.6 Graphic Configuration
- 3.3.7 PCI Express Configuration
- 3.3.8 SATA And RST Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 Power Management
- 3.3.13 Super IO Configuration
- 3.3.14 Serial Console Redirection
- 3.3.15 Miscellaneous
- 3.3.16 Realtek PCIe GBE Family Controller (MAC:00:E0:4C:68:00:0B)
- 3.3.17 APM Configuration
- 3.3.18 EZ-Flash
- 3.3.19 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-12
N5105I-IM-A R2.0
3.3.12 Power Management
EnableACPIAutoConguration
Allow you to enable/disable the ACPI Auto conguration. Conguration options:
[Disabled] [Enabled]
Enable Hibernation
Allow you to enable or disable S4 hibernation. Conguration options: [Disabled]
[Enabled]
ACPI Sleep State
Allow you to select the ACPI sleep state. Conguration options: [Suspend
Disabled] [S3 (Suspend to RAM)]
3.3.13 SuperIOConguration
SerialPort1Conguration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[Disabled] [Enabled]
COM1 Control
Allows you to select the COM1 mode. Conguration options: [RS232]
[RS422] [RS485]
RI# Pin Function
Allows you to select the voltage offset. Conguration options: [Ring] [+5V]
[+12V]