User Manual

3-8
N5105I-IM-A R2.0
Intel(R) SpeedStep(tm)
This item allows you to enable or disable Intel SpeedStep technology.
Conguration options: [Disabled] [Enabled]
Intel(R) Speed Shift Technology
This item allows you to enable or disable Intel(R) Speed Shift Technology
support. When enabled, CPPC v2 interface allows hardware controlled
P-state. Conguration options: [Disabled] [Enabled]
Turbo Mode
This item allows you to enable or disable Turbo Mode for your processor.
Conguration options: [Enabled] [Disabled]
C states
[Enabled] Enables the CPU C states.
[Disabled] Disables the CPU C states.
Enhanced C-states
[Enabled] Enables enhanced C1E state.
[Disabled] Disables enhanced C1E state.
The item appears only when you set C states to [Enabled]
Package C State Limit
Allows you to control the maximum Package C State that the processor
supports. Conguration options: [C0/C1] [C2] [C3] [C6] [C7] [C7S] [C8] [C9]
[C10] [Cpu Default] [Auto]
3.3.6 GraphicConguration
Allows you to select a primary display from supported graphical devices.
Primary Display
Allows you to select a display device to be the primary one. Conguration options:
[AUTO] [IGFX] [PCI]
Internal Graphics
Allows you to enable or disable internal graphics. Conguration options: [AUTO]
[Disabled] [Enabled]
RC6 (Render Standby)
Allows you to enable or disable render standby support. RC6 should be enabled if
S0ix is enabled. Conguration options: [Disabled] [Enabled]