User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 Video Configuration
- 3.3.3 PCH-FW Configuration
- 3.3.4 Trusted Computing
- 3.3.5 CPU Configuration
- 3.3.6 Graphic Configuration
- 3.3.7 PCI Express Configuration
- 3.3.8 SATA And RST Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 Power Management
- 3.3.13 Super IO Configuration
- 3.3.14 Serial Console Redirection
- 3.3.15 Miscellaneous
- 3.3.16 Realtek PCIe GBE Family Controller (MAC:00:E0:4C:68:00:0B)
- 3.3.17 APM Configuration
- 3.3.18 EZ-Flash
- 3.3.19 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-4
N5105I-IM-A R2.0
Switch to LVDS
Allows you to disable or enable switching to LVDS. Conguration options: [Disable
Link] [Enabled]
All-in-One Chassis
Allows you to select All-in-One (AiO) chassis (if applicable) for simplied AiO
conguration. Conguration options: [None] [1920*1080 LVDS1] [1920*1080
LVDS2] [1920*1080 LVDS3] [1600*900 LVDS4]
Improper selection of AiO chassis may result in incorrect operation or potential damage to
AiO chassis hardware.
EDID Data Source
Allows you to select the EDID data source. Conguration options: [Pre-dened]
[Flat Panel Display]
LFP Panel Type
This item appears only when you set the previous item to [Pre-dened] and allows
you to select the LFP panel used by internal graphics device. Conguration
options: [VBIOS Default] [640x480] [800x600] [1024x768] [1280x1024] [1400x1050
LVDS1] [1400x1050 LVDS2] [1600x1200] [1366x768] [1680x1050] [1920x1200]
[1440x900] [1600x900] [1024x768] [1280x800] [1920x1080] [2048x1536]
Backlight Control
Allows you to select the way of backlight control. Conguration options: [PWM
Inverted] [PWM Normal]