User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Trusted Computing
- 4.4.2 PCH Storage Configuration
- 4.4.3 Onboard Devices Configuration
- 4.4.4 ACPI Settings
- 4.4.5 APM Configuration
- 4.4.6 SMART Settings
- 4.4.7 NCT6116D Super IO Configuration
- 4.4.8 NCT6116D HW Monitor
- 4.4.9 Serial Port Console Redirection
- 4.4.10 CPU Configuration
- 4.4.11 AMI Graphic Output Protocol Policy
- 4.4.12 PCI Subsystem Settings
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 SDIO Configuration
- 4.4.16 Platform Trust Technology
- 4.4.17 Security Configuration
- 4.4.18 LFP Configuration
- 4.4.19 Thermal
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
Single Board Computer
59
4.4.4 ACPI Settings
The items in this menu allow you to configure the system ACPI parameters.
Enable ACPI Auto Configuration
Allows you to enable or disable the BIOS ACPI Auto Configuration.
Configuration options: [Disabled] [Enabled]
NOTE: The following item appears only when Enable ACPI Auto
Configuration is set to [Disabled].
Enable Hibernation
Allows you to enable or disable the ability of the system to hibernate (OS/S4
Sleep State).
Configuration options: [Disabled] [Enabled]
IMPORTANT! This option may be not be effective with some OS.
ACPI Sleep State
Allows you to select the highest ACPI sleep state the system will enter when
the SUSPEND button is pressed.
Configuration options: [Suspend Disabled] [S3 (Suspend to RAM)]
Lock Legacy Resources
Allows you to enable or disable the Lock of Legacy Resources.
Configuration options: [Disabled] [Enabled]