User Manual
Table Of Contents
- About this manual
- Chapter 1: Specifications Summary
- Chapter 2: Product Introduction
- Chapter 3: Upgrading your Single Board Computer
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 LVDS Configuration
- 4.4.2 PCH-FW Configuration
- 4.4.3 Trusted Computing
- 4.4.4 CPU Configuration
- 4.4.5 Graphics Configuration
- 4.4.6 Super IO Configuration
- 4.4.7 Serial Console Redirection
- 4.4.8 SATA Configuration
- 4.4.9 Network Stack Configuration
- 4.4.10 USB Configuration
- 4.4.11 Onboard Devices Configuration
- 4.4.12 Miscellaneous
- 4.4.13 APM Configuration
- 4.4.14 EZ-Flash
- 4.4.15 Watchdog Timer
- 4.5 Hardware Monitor menu
- 4.6 Security menu
- 4.7 Boot menu
- 4.8 Exit menu
- 4.9 Updating your BIOS
- Appendix
90 Single Board Computer
To update the BIOS using EzFlash Utility:
1. Insert the USB flash disk that contains the latest BIOS file to a USB port.
2. Enter the BIOS setup program. Go to the Advanced menu > EZ-Flash >
Enter Ez-Flash mode. Select Yes and then OK to auto reboot and enter
EZ-Flash mode.
WARNING! Make sure to back up your Bitlocker recovery key and
suspend Bitlocker encryption in the operating system before updating
your BIOS.
3. Use the Up/Down arrow keys to find the USB flash disk that contains
the latest BIOS, and then press <Enter>.
4. Use the Up/Down arrow keys to find the BIOS file then press <Enter>.
EZ-Flash
[Help] : Move, Enter: Select, Esc: Exit/Back to the start page.
ASUSTek COMPUTER INC.
TRANSCEND 512GB
PE2000S_ASUS.CAP
N97S_N200S_N305S_X742ES-IM-AA_ASUS.CAP
5. Reboot the system when the update process is done.