User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 NVMe Configuration
- 3.3.13 Onboard Devices Configuration
- 3.3.14 Miscellaneous
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-14
N100I-EM-A
Configuration options: [Second Mode] [Minute Mode]
Watchdog Timer
Allows you to set the Watchdog Timer I Time-out value.
3.4 Hardware Monitor menu
The Hardware Monitor menu displays the system temperatures, fan and power
status, and allows you to configure the smart fan.
Smart Fan Mode
Allows you to select the Smart Fan mode. Configuration options: [Disabled]
[Normal] [Manual Mode]
NOTE: The following items appear only when you set Smart Fan Mode to
[Manual Mode].
Smart Fan Function
Chassis Fan Setting
Chassis Fan Temperature 1 ~4
Allows you to set the value of temperature1~4.
Chassis Fan FD/RPM 1~4
Allows you to set the value of Fan Duty/PRM when temperature is T1~4.
3.5 Security menu
The Security menu allows a new password to be created or a current password to
be changed. The menu also enables or disables the Secure Boot state and lets the
user configure the System Mode state.
3.5.1 Administrator Password
If you have set an administrator password, we recommend that you enter the
administrator password for accessing the system.
To set an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
To change an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press <Enter>.