User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 NVMe Configuration
- 3.3.13 Onboard Devices Configuration
- 3.3.14 Miscellaneous
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-13
Chapter 3: BIOS setup
NOTE: The following items appear when you set Power On By RTC to
[Weekly event].
Alarm day of Week
Allows you to select the day of the week when the system is to wake up.
Configuration options: [Sunday] [Monday] [Tuesday] [Wednesday] [Thursday]
[Friday] [Saturday]
Wake up hour
Allows you to enter a natural number within 0-23 for hour. For example, enter
3 for 3:00 am and 15 for 3:00 pm.
Wake up minute
Allows you to enter a natural number within 0-59 for minute.
Wake up second
Allows you to enter a natural number within 0-59 for second.
NOTE: The following items appear when you set Power On By RTC to
[Monthly event].
Day of the Month
Allows you to select the day of the month when the system is to wake up.
Wake up hour
Allows you to enter a natural number within 0-23 for hour. For example, enter
3 for 3:00 am and 15 for 3:00 pm.
Wake up minute
Allows you to enter a natural number within 0-59 for minute.
Wake up second
Allows you to enter a natural number within 0-59 for second.
3.3.16 EZ-Flash
This item allows you to enter EZ-Flash mode. After you press <Enter>, a
confirmation message appears. Use the left/right arrow key to select between [Yes]
or [No], then press <Enter> to confirm your choice.
3.3.17 Watchdog Timer
Watchdog Support
Configuration options: [Disabled] [Enabled]
NOTE: The following items appear when you set Watchdog Support to
[Enable].
Watchdog Count mode
Allows you to select Watchdog Timer I count mode.