User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 NVMe Configuration
- 3.3.13 Onboard Devices Configuration
- 3.3.14 Miscellaneous
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-11
Chapter 3: BIOS setup
XHCI Hand-off
This item functions as a workaround for OSes without XHCI hand-off support. The
XHCI ownership change should be claimed by XHCI driver.
Configuration options: [Enabled] [Disabled]
USB Mass Storage Driver Support
Allows you to enable or disable USB Mass Storage Driver Support.
Configuration options: [Disabled] [Enabled]
U32G1_1(~4)
Allows you to enable or disable USB port. Once set to [Disabled], any USB devices
plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
USB_5(~7)
Allows you to enable or disable USB port. Once set to [Disabled], any USB devices
plugged into the connector will not be detected by BIOS or OS.
Configuration options: [Disabled] [Enabled]
3.3.12 NVMe Configuration
The NVMe Configuration menu displays the NVMe controller and drive information
of the devices connected and allows you to configure NVMe device options
settings.
3.3.13 Onboard Devices Configuration
HD Audio Controller
Allows you to control detection of the HD-Audio device.
Configuration options: [Enabled] [Disabled]
[Enabled] Enables the HD Audio Device unconditionally.
[Disabled] Disables the HD Audio Device unconditionally.
Realtek LAN 1 Controller
Configuration options: [Disabled] [Enabled]
Realtek LAN 2 Controller
Configuration options: [Disabled] [Enabled]
M.2 WiFi
Allows you to enable or disable M.2 WiFi. Configuration options: [Disabled]
[Enabled]
M.2 BT
Allows you to enable or disable M.2 BT.
Configuration options: [Disabled] [Enabled]
I2C1 Controller
Configuration options: [Disabled] [Enabled]