User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS Setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 LVDS Configuration
- 3.3.2 PCH-FW Configuration
- 3.3.3 Trusted Computing
- 3.3.4 CPU Configuration
- 3.3.5 Graphics Configuration
- 3.3.6 PCI Express Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Redirection
- 3.3.9 SATA Configuration
- 3.3.10 Network Stack Configuration
- 3.3.11 USB Configuration
- 3.3.12 NVMe Configuration
- 3.3.13 Onboard Devices Configuration
- 3.3.14 Miscellaneous
- 3.3.15 APM Configuration
- 3.3.16 EZ-Flash
- 3.3.17 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
N100I-EM-A
2-20
NOTE: The serial port cable is purchased separately.
14. Serial Port headers (10-pin COM4-6)
These headers are for serial (COM) ports. Connect the serial port cable to
any of these headers, then install the module to a slot opening at the back of
the system chassis.
COM4
COM5
RXD1
DTR1#
DSR1#
CTS1#
DCD#
TXD1
GND
RTS1#
RI1#
A
A B C
B
COM6
C
PIN 1 PIN 9
PIN 2
Connector type
Header 2x5p, K10, 2.54mm pitch
15. TPM header (14-1 pin TPM)
This header supports a Trusted Platform Module (TPM) system, which can
securely store keys, digital certicates, passwords and data. A TPM system
also enhances network security, protects digital identities, and ensures
platform integrity.
TPM
PIN 1
PIN 13
PIN 2
S_SPI_TPM_IRQ#
S_SPI_TPM_CS2#
T_SPI_BIOS_WP#
GND
T_SPI_CLK
T_SPI_MOSI
+VCC_SPI_TPM
S_PLTRST#_Onboard
NC
+3VSB_SPI
S_SPI_CS0#
T_SPI_MISO
T_SPI_HOLD#
Connector type
Header 2x7p, K14, 2.0mm pitch