User guide

Synchronize and Enhance 33
Synchronizing your device
Connecting your device to a computer
1. Connect the 26-pin device plug of the sync cable to the 26-pin
connector at the bottom of your device.
2. Connect the other end of the sync cable to a USB port on your
computer.
1
2
Setting up a sync relationship
Immediately after you have completed the installation, the Sync Setup
wizard will start automatically to help you establish a sync relationship
and customize your synchronization settings. At this point, you can decide
exactly which types of information you would like to synchronize with your
computer.
A sync relationship is a le that allows you to synchronize your
device with your desktop computer. This le is stored on your
desktop computer. An additional le that enables your desktop
computer to recognize your device is stored on your device.