User Guide

Avolites Pearl 2000 Operators Manual - page 96
P2000MAN.DOC 19/10/99 17:59
• Press the CHANNEL button. Puts you in the Channel Select Menu.
The current Fixture type is displayed on the prompt line. This will be one of
the instrument types that you have patched. If you want to change this for a
different Fixture you must :
• Press Softbutton B [Select a new Fixture type]. Screen shows all Fixture
types currently patched.
• Select the new Fixture you wish to use. You are automatically returned to the
Channel menu with the new Fixture type listed on the prompt line.
• Type the number of the Fixture you wish to Select. The Fixture with the
lowest Handle number is designated as 1, with the highest Handle
number designated as the highest numbered member of the group.
Number appears on the prompt line as CHANNEL = XX.
• Press ENTER. LED on Selected Fixture lights up.
• Press the CHANNEL button again to exit the Channel menu.
9.6.2 To Select a consecutive series of Fixtures
You can Select consecutive Fixtures of a given type using the THROUGH
button.
• Turn the Key to Program.
• Press the CHANNEL button. Puts you in the Channel Select Menu.
• If required, Select a new Fixture type using Softbutton B.
• Type the number of the first Fixture you wish to Select. Number appears on
the prompt line as CHANNEL = XX.
• Press Softbutton C [THROUGH]
• Type the number of the last Fixture you wish to Select.
• Press ENTER. LED on Selected Fixtures lights up.
Press the CHANNEL button again to exit the Channel menu.
9.6.3 Using Groups with the CHANNEL button
If you have defined any Groups (see section 9.3 Programming Groups),
these can also be manipulated using the CHANNEL button. The same rules
apply to the order in which the Fixtures are deemed to exist in a group.
To Select a Group :
• Turn the Key to Program.
• Press the CHANNEL button. Puts you in the Channel Select Menu.
• Press Softbutton D [GROUP]. The prompt line asks you to input the number of
the Group you wish to Select.
• Press ENTER. LED on Selected Fixtures lights up.
• Press the CHANNEL button again to exit the Channel menu.