User Guide

Avolites Pearl 2000 Operators Manual - page 89
P2000MAN.DOC 19/10/99 17:59
Problem : I stored a Pan and Tilt Preset Focus for all my Fixtures, and it
seems to have changed the Colour Preset Focus I previously stored on the
same button.
Solution : You stored the Pan and Tilt Preset Focus from within the LAMPS
bank, so all the Attributes in the Focus Mask were enabled, and all the
Attributes in the Programmer at that moment were stored.
Problem : I stored a Preset Focus for all my Fixtures, and it didn’t store
Solution : Select all the Fixtures you wish to store in the Preset Focus. Make
sure you touch the Wheels while you are in the relevant Attribute Bank to
put the current values into the Programmer, or they will not store.
Problem : I have a complicated show coming up, and no programming time!
Solution : Use Shared Preset Focuses to save you time on the day.