User Guide

Avolites Pearl 2000 Operators Manual - page 70
P2000MAN.DOC 19/10/99 17:59
Softbutton A [RECORD]
Softbutton B [EDIT TIMES]
Softbutton C [INSERT]
Softbutton D [DELETE]
Softbutton E [PREVIOUS 15 STEPS]
Softbutton F [NEXT 15 STEPS]
(Softbutton G)
7.14.3 RECORD
Make any changes to the scene stored in any Chase step as you would with
a Memory, matching and then altering intensity levels with Preset Faders or
using Wheels to change LTP Attributes.
To store the changes :
• Press Softbutton A [RECORD]. The Screen asks you to press a SWOP button.
• Press the SWOP button of the Chase Step you wish to record the
changes onto.
7.14.4 EDIT TIMES
Use the EDIT TIMES menu to enter Timings into a Chase Step.
Screen 11 is automatically displayed. This shows you which Playback
Channels have Chase Steps on them, and indicates which ones are Simple,
and which are Complex.
• Press Softbutton B [EDIT TIMES]. Screen lists all Chase Steps with a ‘c’ for
Complex or an ‘s’ for Simple.
• Press the SWOP button of the Chase Step you wish to edit. Enter times in
the same way as the TIME INTO LIVE or TIME INTO NEXT menus.
• Press ENTER to enter the times.
7.14.5 DELETE
To DELETE an UNFOLDED Chase Step :
• Press Softbutton D [DELETE].
• Press the SWOP button of the Playback Fader of the Chase Step you
wish to Delete.
• Press ENTER to confirm the DELETE, otherwise press EXIT.
• You may then wish to Renumber following the procedure in Section
7.14.7 Renumbering the UNFOLDED Chase.
⇒ You cannot use the blue DELETE button on the Program Select bank for
this function.
7.14.6 INSERT
To INSERT an UNFOLDED Chase Step :
• Set up the look you wish to record on the new Chase Step.
• Press Softbutton C [INSERT].