User Guide

Avolites Pearl 2000 Operators Manual - page 170
P2000MAN.DOC 19/10/99 17:59
DIVBY=3
26.7 MIRROR
Mirror is used to define the instrument type - Moving head or Moving mirror
and the maximum Pan and Tilt angles through which the instrument can
move. These values are required for the 3D tracking system. Typically a
MIRROR line looks like:-
MIRROR 1 170 110
Where:-
MIRROR is the keyword
1 indicates moving mirror a 2 in this field indicates a moving head
instrument.
170 is the maximum pan movement.
110 is the maximum tilt movement.
26.8 THE DMX/PRESET LAYOUT
The DMX/PRESET LAYOUT will appear in the following format:-
DMX
A B C D E F G H I J K L ; comment
A B C D E F G H I J K L; comment
END
Where DMX is the keyword to tell the desk dmx, preset and fader
information follows.
Field “A”
This sets which Attribute Bank will be connected to the DMX channel,
defined later. The range is 1 to 12 for the desk, but up to 15 for the tablet.
A 0 (zero) in this field indicates it is part of a 16 bit channel defined in the
previous line.
Field “B”
This tells the desk which fader of the Attribute Bank selects is used for that
channel, where 1 means bottom row and 61 top row.
Field “C”
This is the channel type, currently there are 5 different channel types
available :-
H (HTP) for dimmer
L (LTP) for moving lights and scrollers
I (instant) LTP channel which does not fade
S (double byte) 16 bit LTP channel which does not fade
s (double byte) 16 bit LTP channel
Field “D”
This is the relative DMX address of the attribute being defined, starting from
1.