User Guide

Avolites Pearl 2000 Operators Manual - page 161
P2000MAN.DOC 19/10/99 17:59
23. Appendix 5. Functions of the ADD button in Run modes
23.1
This table applies to Normal Run mode, Take Over Run mode and Two
Preset mode.
LINKS
Off or
On
FADER
at Full
or
Zero
Fader mode in Chase
Parameters
FADER WILL RELOAD CHASE
FADER STOPS / GO TO START
FADER STOPS /STARTS CHASE
Effect
OFF ZERO FADER WILL RELOAD CHASE DOES NOTHING
ON ZERO FADER WILL RELOAD CHASE CHASE RUNS AS IF FADER AT FULL
OFF FULL FADER WILL RELOAD CHASE RUNS NEXT CHASE STEP
ON FULL FADER WILL RELOAD CHASE CHASE GOES STRAIGHT TO NEXT
STEP AND CONTINUES TO RUN
OFF ZERO FADER STOPS/STARTS CHASE RUNS CHASE TO END OF CHASE
STEP
ON ZERO FADER STOPS/STARTS CHASE CHASE RUNS AS IF FADER AT FULL
OFF FULL FADER STOPS/STARTS CHASE RUNS NEXT CHASE STEP
ON FULL FADER STOPS/STARTS CHASE CHASE GOES STRAIGHT TO NEXT
STEP AND CONTINUES TO RUN
OFF ZERO FADER STOPS, GO TO START RUNS CHASE TO END OF CHASE
STEP
ON ZERO FADER STOPS, GO TO START CHASE RUNS AS IF FADER AT FULL
OFF FULL FADER STOPS, GO TO START RUNS NEXT CHASE STEP
ON FULL FADER STOPS, GO TO START CHASE GOES STRAIGHT TO NEXT
STEP AND CONTINUES TO RUN
Note that FADER STOPS, GO TO START assumes that the Fader has been
brought to zero and the Chase has therefore stopped.