User Guide

Avolites Pearl 2000 Operators Manual - page 126
P2000MAN.DOC 19/10/99 17:59
Problem : After fitting a Wipeall link, the Pearl does not power up correctly.
Solution : You can force it to power up in the AVOS2 menu by fitting the
AVOS link as follows :
• Switch off the desk and unplug it. (It is probably still open).
• Locate the links near the chip marked SASHA.
• Make link 1.
• Plug in and power up the desk. The LCD Screen should now display the AVOS II
menu.
• Press Softbutton A [Start The System]. Do NOT select any other option.
• Power down the desk and unplug it.
• Remove the all the links. Replace these as found.
• Close the desk and refasten the Dzus fasteners.
• Plug in and power up the desk.
• Reload your Show in the usual way. See Section 14.1.3 Loading a show
from disk.
14.9.1 Formatting a PC disk
In DOS :
• Place disk to be Formatted into the PC drive.
• At the DOS prompt type FORMAT A: /F:1440 /U to format a high
density disk or FORMAT A: /F:720 /U to format a double density
disk.
• Press RETURN.
In Windows 3.11 :
• At the Widows 3.11 prompt, enter File Manager.
• In the CAPACITY box, select 720K or 1.44 Mb Do not select MAKE
SYSTEM DISK or QUICK FORMAT.
• Click OK.
• Click YES.
In Windows 95 :
• From File Manager click DISK.
• Click FORMAT.
• In the CAPACITY box, select 720K or 1.44 Mb and select format type
FULL.
• Click START.