User Guide

Avolites Pearl 2000 Operators Manual - page 118

P2000MAN.DOC 19/10/99 17:59

• Turn the Key to Run.

• Press Softbutton A to toggle Run Modes. The Mode may not toggle through all

three modes depending on what is selected in the USER SETTINGS.

The mode in use is shown on the Screen prompt line.

13.4 Help and Hints

Problem : You cannot control LTP Channels in Run mode.

Solution : Change to Take Over Run mode.

Problem : My ADD and SWOP buttons seem very slow.

Solution : Use Normal Run Mode.

Problem : My ADD and SWOP buttons don’t control my Intelligent Fixtures.

Solution : Use Take Over Run Mode.