Installation Manual

1. Automatic calibration (Auto Adjust): Press and hold the SPLENDID
key about 4 seconds for automatic correction
NOTE: i. "Auto Adjust" is valid only when the input is analog signal (VGA).
ii. Not every model has Auto Adjust hotkey.
2. Please adjust the current resolution to the correct setting and refresh rate
according to different sizes:
［4:3］17": 1280x1024/ 60Hz
［16:9］23"-46": 1920x1080/60Hz, 65": 1920x1080 / 120Hz
［16:10］20": 1680x1050/ 60Hz, 24": 1920x1200/ 60Hz
3. Update the graphic card driver:
My monitor cannot display proper resolution
4. Monitor Reset: Back to the initial value of display
Hold down the MENU key and select MENU > System Setup > Reset > select " Yes "