User's Manual
Table Of Contents
32
ASUS Mini PC PL Series
Enabling EDID Emulation or Virtual
Display
EDID Emulation is a feature that allows interruption free display connectivity
with persistent display emulation, whereas Virtual Display is a feature that
enables remote access of a headless conguration system.
To enable EDID Emulation or Virtual Display:
1. Enter the BIOS by pressing <F2> or <DEL> from the POST screen.
2. Navigate to the Advanced > Advanced Display Managment
Conguration submenu.
3. Select the Emulation EDID option, and press <Enter>.
4. Select EDID Emulation or Virtual Display depending on your
requirement.
When either EDID Emulation or Virtual Display is enabled, any time that
you want to change the number of display outputs, you will need to do the
following to redetect and rearrange the display layout
1. Power o your Mini PC.
2. Connect or disconnect your display(s).
3. Press in the EDID Reset pinhole (refer to the Rear view section for the
location) using an unfolded paper clip.
4. Power back on your Mini PC and it will retrieve EDID from the display(s).
NOTE: If no display emulation is active (both EDID Emulation and
Virtual Display are disabled), pressing the EDID Reset pinhole will not
trigger your Mini PC to retrieve EDID from the display(s).