User's Manual

30
ASUS Mini PC PB40
Installing top memory module
IMPORTANT!
Refer to http://www.asus.com for the list of compatible DIMMs.
You can only install DDR4 SO-DIMMs to the Mini PC’s DIMM slot.
Only ASUS-authorized technicians should remove and install
motherboard and mechanical parts inside your Mini PC. Please
refer to the terms and conditions in the warranty card.
Visit an authorized ASUS service center or retailer for
information on module upgrades for your Mini PC.
1. (optional) Remove the storage bay if a storage bay is installed. Follow
step 2 under the Installing 2.5” HDD or SSD section to remove the
storage bay.
2. (optional) If your model has a fan installed, remove the three
(3) screws securing the fan, then lift the fan upwards so that it is
perpendicular to the heatsink, but do not remove the fan completely.