User Guide

ASUS MES-N User’s Manual 21
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
7) Secondary Cable Type Status (SCTS)
Setting this jumper to 80-pin will allow an UltraDMA/66 IDE device that is
connected to the secondary IDE connector with a 40-pin 80-conductor IDE cable
to handle transfer rates up to 66MB/s.
Setting SCTS
40 pin [2-3] (default)
80 pin [1-2]
MES-N Secondary Cable Type Status
SCTS
40-pin Cable
(Default)
3
2
1
80-pin Cable
3
2
1
®
TOP:
MOUSE
BOTTOM:
KEYBOARD
MES-N