User Guide

2-6

Chapter 2: Boot Agent Conguration

To install the iSCSI option ROM:

1. Locate the

BootIMG.FLB

and

Bootutil.exe

les in the iSCSI folder on your SDVD.

2. Copy the

BootIMG.FLB

and

Bootutil.exe

les to a bootable USB storage device.

3. Enter DOS environment.

The utility must run under pure DOS environment. It cannot run in a DOS box on Windows

system. You should boot from a DOS oppy without any device drivers.

4. Within the DOS environment, enter the directory with the

BootIMG.FLB

and

Bootutil.

exe

les.

5. Install the iSCSI option ROM:

bootutil -nic=1 -up=iscsi -quiet

All ports share the same ash.

6. Restart the system.

C:\I350>bootutil -nic=1 -up=iscsi -quiet

Intel(R) Ethernet Flash Firmware Utility

BootUtil version 1.5.94.2

Programming ash on port 1 with ash rmware image

Flash update successful

Port Network Address Location Series WOL Flash Firmware Version

==== =============== ======== ======= === ============================= =======

1 001FC6FFFFF1 1:00.0 Gigabit YES iSCSI 3.0.84

2 001FC6FFFFF2 1:00.1 Gigabit YES iSCSI 3.0.84

3 001FC6FFFFF3 1:00.2 Gigabit YES iSCSI 3.0.84

4 001FC6FFFFF4 1:00.3 Gigabit YES iSCSI 3.0.84

5 000C6E000072 7:00.0 Gigabit YES FLASH UNnknown

C:\I350>