User Guide

2-2

Chapter 2: Boot Agent Conguration

2.1 Intel(R) iSCSI Remote Boot

The Intel(R) iSCSI Remote Boot provides hardware-based Ethernet card congurations.

To start the Intel(R) iSCSI Remote Boot and access the main screen:

1. Turn on the system.

2. During POST, press <Ctrl+D> when the following screen appears.

3. From the

iSCSI Port Selection

screen, use the Up/Down arrow key to select an

Ethernet device to congure and press <Enter>.

Intel(R) iSCSI Remote Boot version 3.0.84

Press ESC key to skip iSCSI boot initialization.

Press <Ctrl-D> to run setup...

MAC:001FC6FFFFF1 Dev:1521 Loc:1:0:0 BOOT:DISABLED

MAC:001FC6FFFFF2 Dev:1521 Loc:1:0:1 BOOT:DISABLED

MAC:001FC6FFFFF3 Dev:1521 Loc:1:0:2 BOOT:DISABLED

MAC:001FC6FFFFF4 Dev:1521 Loc:1:0:3 BOOT:DISABLED

More below ...

Intel(R) iSCSI Remote Boot v3.0.84

Select iSCSI Boot priority: P=PRIMARY S=SECONDARY D=DISABLED B=BLINK LED

iSCSI Port Selection

•

Press <P> to set the selected item as the primary boot priority, press <S> to set the

selected item as the secondary boot priority, or press <D> to disable the selected item.

•

Press <B> to blink the LED of the selected item.

4. From the

iSCSI Port Configuration

screen, use the Up/Down arrow key to select an

item and press <Enter>.

iSCSI Boot Conguration

iSCSI CHAP Conguration

Discard changes and Exit

Save changes and Exit

Intel(R) iSCSI Remote Boot v3.0.84

iSCSI Port Conguration