User Guide

ASUS MCI-10G/X550-2T

2-7

To install the iSCSI option ROM:

1. Locate the

BootIMG.FLB

and

Bootutil.exe

les in the iSCSI folder on your SDVD.

2. Copy the

BootIMG.FLB

and

Bootutil.exe

les to a bootable USB storage device.

3. Enter DOS environment.

The utility must run under pure DOS environment. It cannot run in a DOS box on Windows

system. You should boot from a DOS oppy without any device drivers

4. Within the DOS environment, enter the directory with the

BootIMG.FLB

and

Bootutil.

exe

les.

5. Install the iSCSI option ROM:

bootutil.exe -nic=1 -up=iscsi -quiet

Port 1 and Port 2 share the same ash.

6. Restart the system.

D:\>bootutil.exe -nic=1 -up=iscsi -quiet

Intel(R) Ethernet Flash Firmware Utility

BootUtil version 1.6.39.1

Programming ash on port 1 with ash rmware image

Flash update successful

Port Network Address Location Series WOL Flash Firmware Version

==== =============== ======== ======= === ============================= =======

1 00E018122208 1:00.0 10GbE YES UEFI,PXE Enabled 2.3.58

2 00E018122209 1:00.1 10GbE YES UEFI,PXE Enabled 2.3.58

D:\>