User Guide

2-24
Chapter 2: Basic Installation
Chapter 2
2.4.3 Setting up your OC Panel II in Extreme Mode
TheOCPanelIIinExtremeModeissetupwithanopenchassissystemor“open-air”OC
test bed assembly and enjoyed as a handheld console to perform overclocking and voltage
tuning.
WheninExtremeMode,youcanutilizemorefeaturessuchasSubzeroSenseandVGA
Hotwire. It also comes with some of the most commonly used voltage tuning presets that are
preconguredfortheoptimumoverclockingexperienceatyourconvenience.
TosetuptheOCPanelIIinExtremeMode:
1. Shut down your computer.
2. ConnecttheOCPanelcable(A)andaSATAPowercable(B)totheOCPanelII.
3. LocatetheROG_EXTconnectoronthemotherboardandconnecttheOCPanelcable.
4. Bootyourcomputer.
5. Press the OC Panel II power button to turn on the OC Panel II LCM display.
ExtremeModecapabilitiesincludingV1,V2,DRAM,andothervoltagedenitionsvaryby
chipset. Please refer to your motherboard manual for details.