User Guide
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- 3.1 Knowing BIOS
- 3.2 BIOS setup program
- 3.3 My Favorites
- 3.4 Main menu
- 3.5 Extreme Tweaker menu
- 3.6 Advanced menu
- 3.6.1 CPU Configuration
- 3.6.2 Platform Misc Configuration
- 3.6.3 System Agent (SA) Configuration
- 3.6.4 ROG Effects
- 3.6.5 PCH Configuration
- 3.6.6 PCH Storage Configuration
- 3.6.7 USB Configuration
- 3.6.8 Network Stack Configuration
- 3.6.9 Onboard Devices Configuration
- 3.6.10 APM Configuration
- 3.6.11 HDD/SDD SMART Information
- 3.6.12 Intel(R) ThunderBolt
- 3.6.1 CPU Configuration
- 3.7 Monitor menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Exit menu
- 3.11 Updating BIOS
- Chapter 4: Software Support
- 4.1 Installing an operating system
- 4.2 Support DVD information
- 4.3 Software information
- 4.4 AI Suite 3
- 4.5 Dual Intelligent Processors 5
- 4.6 ROG Audio features
- 4.7 Sonic Radar II
- 4.8 GameFirst III
- 4.9 KeyBot II
- 4.10 ASUS Media Streamer
- 4.11 RAMDisk
- 4.12 MemTweakIt
- 4.13 ROG CPU-Z
- 4.14 RAMCache
- 4.15 Lighting Control
- Chapter 5: RAID Support
- Appendix
1-42
Chapter 1: Product Introduction
Chapter 1
7. CPU, water pump, CPU optional, extension, and chassis fan connectors (4-pin
CPU_FAN; 4-pin W_PUMP; 4-pin CPU_OPT; 5-pin EXT_FAN; 4-pin CHA_FAN1-4)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
• DO NOT forget to connect the fan cables to the fan connectors. Insufcient air ow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
• Ensure to fully insert the 4-pin CPU fan cable to the CPU fan connector.
The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.