User Guide
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- 3.1 Knowing BIOS
- 3.2 BIOS setup program
- 3.3 My Favorites
- 3.4 Main menu
- 3.5 Extreme Tweaker menu
- 3.6 Advanced menu
- 3.6.1 CPU Configuration
- 3.6.2 Platform Misc Configuration
- 3.6.3 System Agent (SA) Configuration
- 3.6.4 ROG Effects
- 3.6.5 PCH Configuration
- 3.6.6 PCH Storage Configuration
- 3.6.7 USB Configuration
- 3.6.8 Network Stack Configuration
- 3.6.9 Onboard Devices Configuration
- 3.6.10 APM Configuration
- 3.6.11 HDD/SDD SMART Information
- 3.6.12 Intel(R) ThunderBolt
- 3.6.1 CPU Configuration
- 3.7 Monitor menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Exit menu
- 3.11 Updating BIOS
- Chapter 4: Software Support
- 4.1 Installing an operating system
- 4.2 Support DVD information
- 4.3 Software information
- 4.4 AI Suite 3
- 4.5 Dual Intelligent Processors 5
- 4.6 ROG Audio features
- 4.7 Sonic Radar II
- 4.8 GameFirst III
- 4.9 KeyBot II
- 4.10 ASUS Media Streamer
- 4.11 RAMDisk
- 4.12 MemTweakIt
- 4.13 ROG CPU-Z
- 4.14 RAMCache
- 4.15 Lighting Control
- Chapter 5: RAID Support
- Appendix
3-34
Chapter 3: BIOS Setup
Chapter 3
3.6.10 APM Configuration
ErP Ready [Disabled]
Allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Conguration options: [Disabled] [Enabled(S4+S5] [Enabled(S5)]
Restore AC Power Loss [Power Off]
[Power Off] The system goes into OFF state after an AC power loss.
[Power On] The system goes into ON state after an AC power loss.
[Last State] The system goes into either OFF or ON state, whatever the system state
was before the AC power loss.
Power On By PCI-E/PCI [Disabled]
Allows you to enable or disable the wake-on-LAN function for the onboard LAN controller or
other installed PCI-E LAN cards.
Conguration options: [Disabled] [Enabled]
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] Generates a wake event and congure the real-time clock (RTC) alarm
date.