User’s Manual

2-22 Chapter 2: BIOS information
Surround View [Auto]
If you set the PCI Express device as the primary display and enable this item, you may use
the internal graphics as the secondary display. This item appears only when you set the
Internal Graphics Mode item to [UMA]. Conguration options: [Auto] [Enabled] [Disabled]
When set to [Auto], only the primary display could be activated.
Frame Buffer Location [Above 4G]
Allows you to select the FB Location. Conguration options: [Below 4G] [Above 4G]
AMD HDMI Audio [Enabled]
Allows you to disable or enable the HDMI Audio. Conguration options: [Disabled] [Enabled]
2.5.3 Onboard Devices Conguration
Serial Port1 Address [3F8/IRQ4]
Selects the Serial Port1 base address. Conguration options: [Disabled] [3F8/IRQ4]
[2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
HDAudio Controller [Enabled]
Enables or disables the high denition audio controller. Conguration options: [Disabled]
[Enabled]
Front Panel Select [HD Audio]
Selects the front panel type. Conguration options: [AC97] [HD Audio]
OnBoard LAN Controller [Enabled]
Enables or disables the onboard LAN controller. Conguration options: [Disabled] [Enabled]
OnBoard LAN Boot ROM [Disabled]
Enables or disables the Onboard LAN Boot ROM. Conguration options: [Disabled]
[Enabled]
1394 Controller [Enabled]
Enables or disables the 1394 controller. Conguration options: [Disabled] [Enabled]
USB3.0 Controller [Enabled] (for M4A88T-V EVO/USB3 only)
Enables or disables the USB3.0 controller. Conguration options: [Disabled] [Enabled]
SidePort Clock Speed [DDR3-1333MHz]
This item appears only when you set the Internal Graphics Mode item to
[SIDEPORT] or [UMA+SIDEPORT]. Conguration options: [DDR3-1333MHz]
[DDR3-1400MHz] [DDR3-1430MHz] [DDR3-1460MHz] ~ [DDR3-2000MHz]
UMA-SP Interleave Mode [Auto]
This item appears only when you set the Internal Graphics Mode item to
[UMA+SIDEPORT]. Conguration options: [Auto] [Coarse] [Fine]