User’s Manual

華碩 M4A88T-V EVO 系列主板用戶手冊 2-13
2.4.1 CPU Level UP [Auto]
本項目用來選擇 CPU 層級，則與所選的層級相關的參數會自動調整。若是您想要
進行詳細的手動設置，在選擇 CPU 層級之後，將【CPU Overclocking】項目設置為
[Manual]。設置值有：[Auto] [Phenom II-955] [Phenom II-3.4G] [Phenom II-3.6G]
注意！在您設置此高級菜單設置時，不正確的設置值將導致系統功能異常。
此部分中的設置值依您主板上所安裝的 CPU 與 內存條型號而定。
2.4 Ai Tweaker 菜單（Ai Tweaker）
Ai Tweaker 菜單項目可讓您設置超頻的相關選項。
往下滾動顯示以下項目：
‧ 設置值會隨著所安裝的 CPU 而有所不同。
‧ 對 CPU Level Up 功能的支持會依照 CPU 類型而不同。
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
M4A88T-V EVO/USB3 BIOS Setup
Main Ai Tweaker Advanced Power Boot Tools Exit
Warning: this function
belongs to overclock-
ing, and it may cause
instability.
Select a CPU level,
and the rest will be
auto-adjusted. If you
want to adjust more,
set Ai Overclock Tuner
to Manual after you
select a CPU level.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Congure System Performance Settings
Target CPU Frequency: 3000MHz
Target DRAM Frequency: 1333MHz
CPU Level UP [Auto]
-------------------------------------------------
CPU OverClocking [Auto]
CPU Ratio [Auto]
DRAM Frequency [Auto]
CPU/NB Frequency [Auto]
HT Link Speed [Auto]
GPU Booster [Enabled]
Enhanced iGPU SpeedStep [Auto]
GPU Power Saving Mode [Disabled]
OC Tuner Utility
DRAM Timing Conguration
DRAM Driving Conguration
******* Please key in numbers directly! *******
CPU & NB Voltage Mode [Offset]
Version 0202
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
CPU Offset Voltage 1.350 [Auto]
CPU/NB Offset Voltage 1.100 [Auto]
CPU VDDA Voltage 2.500 [Auto]
DRAM Voltage 1.500 [Auto]
HT Voltage 1.200 [Auto]
NB Voltage 1.100 [Auto]
NB 1.8V Voltage 1.800 [Auto]
SB Voltage 1.100 [Auto]
SidePort Memory Voltage 1.500 [Auto]
***********************************************
CPU Load-Line Calibration [Auto]
CPU/NB Load-Line Calibration [Auto]
PCI/PCIe CLK Status [Enabled]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit