Specifications

3-28 Chapter 3: BIOS setup

Chapter 3

Chassis Q-Fan Function [Disabled]

[Disabled] Disables the Chassis Q-Fan control feature.

[Enabled] Enables the Chassis Q-Fan control feature.Chassis Q-Fan control feature. Q-Fan control feature.

The following item appears only when you set Chassis Q-Fan Function to [Enabled].

Quiet Chassis Fan Mode [Silent]

[Performance] Sets to [Performance] to achieve maximum chassis fan speed.

[Optimal] Sets to [Optimal] to make the chassis fan automatically adjust

depending on the chassis temperature.

[Silent] Sets to [Silent] to minimize fan speed for quiet chassis fan operation.

3.8 Boot menu

The Boot menu items allow you to change the system boot options. Select an item then press

<Enter> to display the submenu.

Select Screen

Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit

BIOS SETUP UTILITY

Main Ai Tweaker Advanced Power Boot Tools Exit

Boot Settings

Boot Device Priority

Boot Settings Conguration

Security

Species the Boot

Device Boot Priority

sequence.

A virtual oppy disk

drive (Floppy Drive B:

) may appear when you

set the CD-ROM drive

as the rst boot

device.

1st ~ xxth Boot Device [1st FlOPPY DRIVE]

These items specify the boot device priority sequence from the available devices. The

number of device items that appears on the screen depends on the number of devices

installed in the system.

Conguration options: [1st FlOPPY DRIVE] [Hard Drive] [ATAPI CD-ROM] [Disabled]

3.8.1 Boot Device Priority

Boot Device Priority

1st Boot Device [1st FLOPPY DRIVE]

2nd Boot Device [Hard Drive]

3rd Boot Device [ATAPI DVD-ROM]

BIOS SETUP UTILITY

Boot