Specifications

3-22 Chapter 3: BIOS setup
Chapter 3
3.6.3 Onboard Devices Conguration
High Denition Audio [Auto]
[Enabled] Enables the High Denition Audio Controller.
[Disabled] Disables the controller.
The following item appears only when you set the High Denition Audio item to [Enabled].
Front Panel Type [HD]
[AC 97] Sest the front panel audio connector (AAFP) mode to legacy AC’97.
[HD] Sets the front panel audio connector (AAFP) mode to high denition audio.
SPDIF_OUT Mode Setting [SPDIF Output]
If your graphics card has HDMI output and needs to use SPDIF signal from the SPDIF_Out
header, you need to set to HDMI Output for HDMI audio output.
[SPDIF Output] Sets [SPDIF Output] for SPDIF audio output.
[HDMI Output] Sets to [HDMI Output] for HDMI audio output.
Onboard LAN [Enabled]
[Enabled] Enables the onboard LAN controller.
[Disabled] Disables the onboard controller.
The following item appears only when you set the Onboard LAN item to [Enabled].
Onboard LAN Boot ROM [Disabled]
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
Firewire 1394 [Enabled]
[Enabled] Enables the onboard 1394 device support.
[Disabled] Disables the onboard 1394 device support.onboard 1394 device support.
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Conguration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
On Board Devices Conguration
High Denition Audio [Enabled]
Front Panel Type [HD]
SPDIF_OUT Mode Setting [SPDIF Output]
Onboard LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Firewire 1394 [Enabled]
Serial Port1 Address [3F8/IRQ4]
Disabled
Enabled
BIOS SETUP UTILITY
Advanced