Specifications

3-6 Chapter 3: BIOS setup
Chapter 3
3.2.4 ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS le
when it fails or gets corrupted during the updating process. You can update a corrupted BIOS
le using the motherboard support DVD or the oppy disk that contains the updated BIOS le.
Prepare the motherboard support DVD or the oppy disk containing the updated
motherboard BIOS before using this utility.
Recovering the BIOS
To recover the BIOS:
1. Turn on the system.
2. Insert the oppy disk or support DVD containing BIOS le to the oppy disk or optical
drive.
3. The utility displays the following message and automatically checks the oppy disk or
support DVD for the BIOS le.
4. Restart the system after the utility completes the updating process.
When found, the utility reads the BIOS le and starts ashing the corrupted BIOS le.
Bad BIOS checksum. Starting BIOS recovery...
Checking for oppy...
Bad BIOS checksum. Starting BIOS recovery...
Checking for oppy...
Floppy found!
Reading le “M4a79tdlx.ROM”. Completed.
Start ashing...
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Setup Defaults item under the Exit menu. See section 3.10 Exit Menu for
details.