User Guide
10. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either High Denition Audio or AC`97 audio standard. Connect one end of the front
panel audio I/O module cable to this connector.
• We recommend that you connect a high-denition front panel audio module to this
connector to avail of the motherboard high-denition audio capability.
• If you want to connect a high-denition front panel audio module to this connector,
ensure that the Front Panel Select item in the BIOS is set to [HD]. If you want to
connect an AC’97 front panel audio module to this connector, set the item to [AC97].
See page 2-20 for details.
Chapter 1: Product introduction 1-29