User guide

3-20 Chapter 3: BIOS setup
Chapter 3
ECC Conguration
ECC Mode [Disabled]
Disables or sets the DRAM ECC mode that allows the hardware to report and correct
memory errors.
[Disabled] Disables the DRAM ECC mode.
[Basic] Set to [Basic] to adjust ECC mode automatically.
[Good] Set to [Good] to adjust ECC mode automatically.
[Super] Set to [Super] to adjust the DRAM BG Scrub sub-item manually.
[Max] Set to [Max] to adjust ECC mode automatically.
[User] Set to [User] to adjust all the subitems manually.
RS780D Conguration
Set the level of ECC
protection. Note: The
‘Super’ ECC mode
dynamically sets the
DRAM scrub rate so
all of memory is
scrubbed in 8 hours.
ECC Conguration
ECC Mode [Disabled]
DRAM ECC Enable [Disabled]
DRAM SCRUB REDIRECT [Disabled]
4-Bit ECC Mode [Disabled]
DRAM BG Scrub [Disabled]
Data Cache BG Scrub [Disabled]
L2 Cache BG Scrub [Disabled]
L3 Cache BG Scrub [Disabled]
BIOS SETUP UTILITY
Advanced
Internal Graphics Conf
NorthBridge2 Chipset Conguration
Internal Graphics Conguration
PCI Express Conguration
Primary Video Controller [PCI-E]
BIOS SETUP UTILITY
Advanced
Internal Graphics Conguration
Internal Graphics Conguration
Internal Graphics Mode [UMA+SidePort]
UMA Frame Buffer Size [Auto]
SidePort Clock Speed [DDR2-800MHz]
SidePort Voltage [Auto]
GFX Engine Clock Override [Disable]
Surround View [Auto]
BIOS SETUP UTILITY
Advanced
Options
Disable
UMA
SidePort
UMA+SidePort