Specifications

ASUS M2N-X
2- 23
Memclock Mode [Auto]
Select the DRAM Frequency programming method. If Auto, the DRAM
speed will be based on SPDs. If Limit, the DRAM speed will not exceed
the specied value. If Manual, the DRAM specied will be programmed
regardless.
Conguration options: [Auto] [Limit] [Manual]
CAS Latency (CL) [Auto]
Sets the CAS latency timing.
Conguration options: [Auto] [3.0] [4.0] [5.0] [6.0]
TRCD [Auto]
Sets the RAS-to-CAS delay timing.
Conguration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRP [Auto]
Sets the row-precharge delay timing.
Conguration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRAS [Auto]
Sets the row-active delay timing.
Conguration options: [Auto] [5 CLK] [6 CLK] ~ [18 CLK]
Command Timing (2T mode) [Auto]
Sets the command timing. (per clock unit)
Conguration options: [Auto] [1T] [2T]
Memory Conguration
Memory Setting: 266MHz-4.0-4-4-12-2T
Memclock Mode [Auto]
CAS Latency (CL) [Auto]
TRCD [Auto]
TRP [Auto]
TRAS [Auto]
Command Timing (2T mode) [Auto]
MCT Timing Mode [Auto]
Bank Interleaving [Disabled]
Enable Clock to ALL DIMMs [Disabled]
MemCLK Tristate C3/ATLVID [Disabled]
DQS Signal Training Control [Enabled]
Memory Hole Remapping [Enabled]
Mem ory Co nfi gur ati on