Motherboard M2NPV-VM
E2806 Second Edition V2 November 2006 Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Notices.......................................................................................................... vi Safety information...................................................................................... vii M2NPV-VM specifications summary........................................................ viii Chapter 1: Product introduction 1.1 Welcome!....................................................................................... 1-2 1.3 Special features......................
Contents Chapter 2: BIOS setup 2.1 Managing and updating your BIOS............................................. 2-2 2.1.1 ASUS Update utility......................................................... 2-2 2.1.3 ASUS EZ Flash 2 utility.................................................... 2-6 2.1.2 2.1.4 2.1.5 2.2 2.1.6 ASUS CrashFree BIOS 2 utility..................................... 2-10 BIOS menu screen......................................................... 2-12 2.2.3 Legend bar...................
Contents 2.5 Power menu................................................................................. 2-30 2.5.1 ACPI Suspend Type....................................................... 2-30 2.5.3 APM Configuration......................................................... 2-30 2.5.2 2.6 2.5.4 2.6.1 Boot Device Priority....................................................... 2-34 2.6.3 Hard Disk Drives............................................................ 2-35 2.6.4 2.6.5 2.
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information Electrical safety • • • • • • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This manual contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. This chapter also lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.
Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
M2NPV-VM specifications summary CPU.
M2NPV-VM specifications summary IEEE1394 TI IEEE 1394a controller supports: - 2 x IEEE 1394a ports Manageability WfM2.0, DMI2.0, WOL by PME, WOR, PXE, Chassis Intrusion Special features ASUS Q-Fan 2 ASUS C.P.R. (CPU Parameter Recall) ASUS CrashFree BIOS 2 ASUS EZ Flash 2 ASUS O.C. Profile ASUS MyLogo™ Stepless Frequency Selection (SFS) allows FSB tuning from 200 MHz to 400 MHz at 1 MHz increment Note: ASUS CrashFree BIOS 2 and ASUS EZ Flash 2 only support VGA/RGB output.
M2NPV-VM specifications summary Power Requirement ATX power supply (with 24-pin and 4-pin 12 V plugs) ATX 12 V 2.0 compliant Form Factor uATX: 9.6 in. x 9.6 in. (24.5cm x 24.5cm) Support CD contents Device drivers ASUS PC Probe II AMD Cool ‘n’Quiet™ utility ASUS Live Update utility Anti-virus software (OEM version) *Specifications are subject to change without notice.
This chapter describes the motherboard features and the new technologies it supports.
1.1 Welcome! Thank you for buying an ASUS® M2NPV-VM motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents Check your motherboard package for the following items.
AMD Cool ‘n’ Quiet Technology The motherboard supports the AMD Cool ‘n’ Quiet Technology, which monitors system operation and automatically adjusts CPU voltage and frequency for a cool and quiet operating environment. See page 2-23 for details. NVIDIA® GeForce™ 6150 GPU and NVIDIA® nForce™ 430 MCP chipsets . The NVIDIA® GeForce™ 6150 graphics processing unit (GPU) Northbridge supports Microsoft® DirectX 9.0 Shader Model 3.
Serial ATA 3Gb/s technology The motherboard supports next-generation SATA hard drives based on the new SATA 3Gb/s storage specification. The onboard NVIDIA® nForce 430 MCP southbridge allows RAID 0, RAID 1, RAID 0+1, RAID 5, and JBOD configurations for four SATA connectors. IEEE 1394a support The IEEE 1394a interface provides high-speed and flexible PC connectivity to a wide range of peripherals and devices compliant to IEEE 1394a standards.
High Definition Audio SoundMAX is the highest performing, most reliable and user-friendly PC audio solution for business professionals, audiophiles, musicians, and gamers. Hear crystal-clear quality from all your audio - MP3 playback, home theatre, advanced gaming, VOIP and more, and never worry - SoundMAX high-definition audio is there to enhance your experience! 1.3.
C.P.R. (CPU Parameter Recall) The C.P.R. feature of the motherboard BIOS allows automatic re-setting to the BIOS default settings in case the system hangs due to overclocking. When the system hangs due to overclocking, C.P.R. eliminates the need to open the system chassis and clear the RTC data. Simply shut down and reboot the system, and the BIOS automatically restores the CPU default setting for each parameter.
1.4 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity • Hold components by the edges to avoid touching the ICs on them.
1.5 Motherboard overview 1.5.1 Motherboard layout 24.5cm (9.6in) PWR_FAN CPU_FAN CHA_FAN1 LAN_USB34 USBPW34 GeForce™6150 TV_OUT M2NPV-VM PRI_IDE CHA_FAN2 PCIEX16 PCI2 AAFP SPDIF_OUT SATA4 TSB43AB22A SB_PWR CD SATA2 nVIDIA nForce™430 PCI1 SATA3 ® ® SATA1 88E1116 SEC_IDE 4Mb BIOS PCIEX1_1 USBPW78 USBPW56 IE1394_1 USB56 1- FLOPPY EATXPWR ® nVIDIA Top:Line In Center:Line Out Bottom:Mic In AD 1986A 24.5cm (9.
1.5.2 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below. 1.5.3 Screw holes Place eight (8) screws into the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws! Doing so can damage the motherboard. Place this side towards.
1.6 Central Processing Unit (CPU) The motherboard comes with a 940-pin AM2 socket designed for the AMD Athlon™ 64 X2/Athlon™ 64/Athlon™ FX/Sempron™ processor. The AM2 socket has a different pinout from the 940-pin socket designed for the AMD Opteron™ processor. Make sure you use a CPU is designed for the AM2 socket. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 1.6.
3. Position the CPU above the socket such that the CPU corner with the gold triangle matches the socket corner with a small triangle. 4. Carefully insert the CPU into the socket until it fits in place. Small triangle Gold triangle The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to prevent bending the pins and damaging the CPU! 5. 6. 7. When the CPU is in place, push down the socket lever to secure the CPU.
1.6.2 Installing the heatsink and fan The AMD Athlon™ 64/Sempron™ processor require a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. Make sure that you use only qualified heatsink and fan assembly. Follow these steps to install the CPU heatsink and fan. 1. Place the heatsink on top of the installed CPU, making sure that the heatsink fits properly on the retention module base.
2. Attach one end of the retention bracket to the retention module base. 3. Align the other end of the retention bracket (near the retention bracket lock) to the retention module base. A clicking sound denotes that the retention bracket is in place. Make sure that the fan and heatsink assembly perfectly fits the retention mechanism module base; otherwise, you cannot snap the retention bracket in place. 4.
1.7 System memory 1.7.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM. DDR2 DIMMs are notched differently to prevent installation on a DDR DIMM socket.
Recommended memory configurations Sockets Mode DIMM_B1 Single-channel Dual-channel (1) DIMM_B2 DIMM_A1 DIMM_A2 Populated – – – Populated Populated – – – – Populated Populated – Populated Populated – – – – Populated Dual-channel (2) Populated Populated Populated Populated Populated Qualified Vendors Lists (QVL) DDR2-800 Size Vendor Chip No. CL SS/ DS Part No.
DDR2-800 Size Vendor Chip No. CL SS/ DS Part No. 512MB Crucial Heat-Sink Package N/A SS BL6464AA804.8FD • 1024MB Crucial Heat-Sink Package N/A DS BL12864AA804.
DDR2-667 CL SS/ DS Part No.
DDR2-533 1-18 CL SS/ DS Part No. A* B* C* E5116AF-5C-E N/A SS KVR533D2N4/256 • • • KINGSTON HYB18T512800AF37 N/A SS KVR533D2N4/512 • • • 1024MB KINGSTON 5YDIID9GCT N/A DS KVR533D2N4/1G • • • 512MB Qimonda HYB18T512800AC37 N/A SS HYS64T64000GU-3.7-A • • • 256MB Qimonda HYB18T512160AF-3.7 N/A SS HYS64T32000HU-3.7-A • • • 512MB Qimonda HYB18T512800AF37 N/A SS HYS64T64000HU-3.7-A • • • 1024MB Qimonda HYB18T512800AF37 N/A DS HYS64T128020HU-3.
DDR2-533 CL SS/ DS Part No. A* B* C* 858S032F25A N/A SS SVM-42DR2/256 • • • Patriot Heat-Sink Package N/A SS PDC21G5600+XBLK • • • 256MB Patriot PM32M16D2B-3.7KC N/A SS PSD2256533 • • • 512MB Patriot PM64M8D2B-3.7KC N/A SS PSD2512533 • • • 1024MB Patriot PM64M8D2B-3.
1.7.3 Installing a DIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. 1. 2. 3. 2 Unlock a DIMM socket by pressing the retaining clips outward. 3 DDR2 DIMM notch Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated.
1.8 Expansion slots In the future, you may need to install expansion cards. The following sub‑sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1.8.1 Installing an expansion card To install an expansion card: 1. 2. 3. 4. 5. 6.
Interrupt assignments IRQ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Priority 1 2 – 11 12 13 14 15 3 4 5 6 7 8 9 10 Standard function System Timer Keyboard Controller Redirect to IRQ#9 IRQ Holder for PCI Steering* Communications Port (COM1)* IRQ Holder for PCI Steering* Floppy Disk Controller Printer Port (LPT1)* System CMOS/Real Time Clock IRQ Holder for PCI Steering* IRQ Holder for PCI Steering* IRQ Holder for PCI Steering* PS/2 Compatible Mouse Port* Numeric Data Processor Primary IDE Channel Secondary IDE
1.8.3 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. The figure shows a LAN card installed on a PCI slot. 1.8.4 PCI Express x1 slot This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI Express specifications. The following figure shows a network card installed on the PCI Express x1 slot. 1.8.
1.9 1. Jumpers Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 3. Move the jumper cap from pins 1-2 (default) to pins 2-3.
2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes. The USBPW12 and USBPW34 jumpers are for the rear USB ports. The USBPW56 and USBPW78 jumper is for the internal USB connectors that you can connect to additional USB ports.
3. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 500 mA on the +5VSB lead, and a corresponding setting in the BIOS. KBPWR 2 1 +5V (Default) 3 2 +5VSB M2NPV-VM ® M2NPV-VM.Keyboard.power.
1.10 Connectors 1.10.1 Rear panel connectors 1 2 3 4 5 6 7 12 1. 2. 3. 4. 11 10 8 9 PS/2 mouse port (green). This port is for a PS/2 mouse. Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. IEEE 1394a port. This 6-pin IEEE 1394a port provides high-speed connectivity for audio/video devices, storage peripherals, PCs, or portable devices. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.
Refer to the audio configuration table for the function of the audio ports in 2, 4, or 6,-channel configuration. Audio 2, 4, or 6-channel configuration Port Light Blue Lime Pink 8. 9. Headset. 2-channel Line In Line Out Mic In 4-channel 6-channel Line In Front Speaker Out Rear Speaker Out Bass/Center Front Speaker Out Rear Speaker Out USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. USB 2.0 ports 1 and 2.
1.10.2 1. Internal connectors Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. Pin 5 on the connector is removed to prevent incorrect cable connection when using an FDD cable with a covered Pin 5. FLOPPY NOTE:.Orient the red markings on the floppy ribbon cable to PIN 1. M2NPV-VM PIN 1 ® M2NPV-VM.
3. IDE connectors (40-1 pin PRI_IDE; 40-1 pin SEC_IDE) The onboard IDE connectors are for Ultra DMA 133/100/66 signal cable(s). There are three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray. Connect the blue connector to the motherboard’s IDE connector, then select one of the following modes to configure your device(s).
4. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4) These connectors are for the Serial ATA signal cables for Serial ATA 3.0 Gb/s hard disk and optical disk drives. The Serial ATA 3 Gb/s is backward compatible with Serial ATA 1.5Gb/s specification. The current Serial ATA I interface allows up to 150 MB/s data transfer rate while Serial ATA II allows up to 300 MB/s data transfer rate, faster than the standard parallel ATA with 133 MB/s (Ultra DMA133).
5. CPU, Chassis, and Power Fan connectors. (4-pin CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN1, 3-pin CHA_FAN2) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors.
USB connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. 1 USB+5V USB_P5USB_P5+ GND USB56 ® M2NPV-VM.USB.2.0.connectors USB78 1 USB+5V USB_P7USB_P7+ GND M2NPV-VM USB+5V USB_P8USB_P8+ GND NC USB+5V USB_P6USB_P6+ GND NC 7.
9. GAME/MIDI port connector (16-1 pin GAME) This connector is for a GAME/MIDI port. Connect the USB/GAME module cable to this connector, then install the module to a slot opening at the back of the system chassis. The GAME/MIDI port connects a joystick or game pad for playing games, and MIDI devices for playing or editing audio files. GAME M2NPV-VM ® M2NPV-VM.GAME.connector MIDI_IN J2B2 J2CY MIDI_OUT J2CX J2B1 +5V +5V J1B2 J1CY GND GND J1CX J1B1 +5V The GAME/MIDI port module is purchased separately.
11. Serial port connectors (10-1 pin COM1; 10-1 pin COM2) These connectors are for serial (COM) ports. Connect the serial port module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. The serial port bracket (COM1) is purchased separately. COM1 PIN 1 COM2 PIN 1 M2NPV-VM ® M2NPV-VM.COM.port.connector 12.
13. TV-out connector (8-1 pin TV_OUT) Pb PR Y +12V This 8-1 pin connector is for the TV-out port module that allows you to connect a television to your system. Connect one end of the HDTV‑out cable to this connector and the other end to the TV-out module. GND +5V ® TV_OUT GND M2NPV-VM M2NPV-VM TV out connector • 1-36 RGB and TV-out can not be used simultaneously.
14. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • We recommend that you use an ATX 12 V Specification 2.0‑compliant power supply unit (PSU) with a minimum of 300 W power rating. This PSU type has 24-pin and 4-pin power plugs.
15. System panel onnector (20-1 pin PANEL) This connector supports several chassis-mounted functions. +5V Ground Ground Speaker PLED- PLED+ PWR LED SPKR ® HD_LED M2NPV-VM.System.panel.connector • • • • • 1-38 Reset Ground PWR Ground M2NPV-VM IDE_LED+ IDE_LED- PANEL RESET PWR BTN * Requires an ATX power supply. System power LED This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
2.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows® environment.) 2. ASUS EZ Flash 2 (Updates the BIOS using a floppy disk/ USB flash disk or the motherboard support CD.) 3. Award BIOS Flash Utility (Updates the BIOS in DOS mode using a bootable floppy disk.) 4.
Quit all Windows® applications before you update the BIOS using this utility. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS from the Internet option from the drop‑down menu, then click Next. ASUS M2NPV-VM 3.
4. 5. From the FTP site, select the BIOS version that you wish to download. Click Next. Follow the screen instructions to complete the update process. The ASUS Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features. Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: 1. 2. 3. 4. 2- Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate.
2.1.2 1. Creating a bootable floppy disk Do either one of the following to create a bootable floppy disk. DOS environment a. Insert a 1.44MB floppy disk into the drive. b. At the DOS prompt, type format A:/S then press . Windows® XP environment a. Insert a 1.44 MB floppy disk to the floppy disk drive. b. Click Start from the Windows® desktop, then select My Computer. c. Select the 3 1/2 Floppy Drive icon. d. Click File from the menu, then select Format.
2.1.3 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS‑based utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing + during the Power-On Self Tests (POST). To update the BIOS using EZ Flash 2: 1. 2. 3. Visit the ASUS website (www.asus.com) to download the latest BIOS file for the motherboard.
2.1.4 Updating the BIOS The Basic Input/Output System (BIOS) can be updated using the AwardBIOS Flash Utility. Follow these instructions to update the BIOS using this utility. 1. Download the latest BIOS file from the ASUS web site. Rename the file to M2NPV-VM.BIN and save it to a floppy disk, CD ROM or a USB flash disk in FAT 16/12 format. Save only the updated BIOS file in the floppy disk to avoid loading the wrong BIOS file. 2. 3. 4. 5. Copy the AwardBIOS Flash Utility (awdflash.
7. 8. Press when the utility prompts you to save the current BIOS file. The following screen appears. The utility verifies the BIOS file in the floppy disk, CD ROM or a USB flash disk and starts flashing the BIOS file. AwardBIOS Flash Utility for ASUS V1.17 (C) Phoenix Technologies Ltd. All Rights Reserved For C51PV-MCP51-M2NPV-VM-00 DATE: 04/13/2006 Flash Type - PMC Pm49FL004T LPC/FWH File Name to Program: M2NPV-VM.
2.1.5 Saving the current BIOS file You can use the AwardBIOS Flash Utility to save the current BIOS file. You can load the current BIOS file when the BIOS file gets corrupted during the flashing process. Make sure that the floppy disk, CD ROM or a USB flash disk has enough disk space to save the file. To save the current BIOS file using the AwardBIOS Flash Utility: 1. 2. Follow steps 1 to 6 of the previous section. Press when the utility prompts you to save the current BIOS file.
2.1.6 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD or the floppy disk that contains the updated BIOS file. • Prepare the motherboard support CD or the floppy disk containing the updated motherboard BIOS before using this utility.
2.2 BIOS setup program This motherboard supports a programmable Low-Pin Count (LPC) chip that you can update using the provided utility described in section “2.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to“Run Setup.” This section explains how to configure your system using this utility. Even if you are not prompted to use the Setup program, you can change the configuration of your computer in the future.
2.2.1 BIOS menu screen Menu items Main Menu bar Advanced Power Configuration fields Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit System Time System Date Legacy Diskette A: 15 : 30 : 36 Mon, Mar 2 2006 [1.44M, 3.5 in.
2.2.3 Legend bar At the bottom of the Setup screen is a legend bar. The keys in the legend bar allow you to navigate through the various setup menus. The following table lists the keys found in the legend bar with their corresponding functions.
2.2.7 Pop-up window Select a menu item then press to display a pop-up window with the configuration options for that item. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit System Time System Date 15 : 30 : 36 Mon, Mar 03 2006 Legacy Diskette A: [1.44M, 3.5 in. Primary IDE Master Legacy Diskette [ST321122A] A: Primary IDE Slave [ASUS CDS520/A] Secondary IDE MasterDisabled [None] ..... [ ] Secondary IDE Slave 720K , 3.5 in. [None] ..... [ ] SATA1 [None] 1.44M, 3.
2.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Refer to section “2.2.1 BIOS menu screen” for information on the menu screen items and how to navigate through them.
2.3.4 Primary and Secondary IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press to display the IDE device information.
Capacity Displays the auto-detected hard disk capacity. This item is not configurable. Cylinder Shows the number of the hard disk cylinders. This item is not configurable. Head Shows the number of the hard disk read/write heads. This item is not configurable. Sector Shows the number of sectors per track. This item is not configurable. PIO Mode [Auto] Sets the PIO mode for the IDE device.
2.3.5 SATA 1-4 While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press to display the SATA device information.
Head Shows the number of the hard disk read/write heads. This item is not configurable. Landing Zone Shows the number of landing zone per track. This item is not configurable. Sector Shows the number of sectors per track. This item is not configurable. After entering the IDE hard disk drive information into BIOS, use a disk utility, such as FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk.
2.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Exit Select Menu JumperFree Configuration AI NET2 CPU Configuration Chipset PCIPnP Onboard Device Configuration F1:Help ESC: Exit 2.4.
The following item becomes user-configurable when you set AI Tuning to [AI Overclocking]. Overclock Options [Disabled] Allows you to set the overclocking options. Configuration options: [Disabled] [Overclock 3%] [Overclock 5%] [Overclock 8%] [Overclock 10%] The following items become user-configurable when you set AI Tuning to [Manual]. CPU Frequency [XXX] (value is auto-detected) Indicates the frequency sent by the clock generator to the system bus and PCI bus.
2.4.2 AI Net2 Phoenix-Award BIOS CMOS Setup Utility Advanced Select Menu AI NET2 POST Check LAN Cable Item Specific Help [Disabled] Pair Status Length LAN1(1-2) LAN1(3-6) LAN1(4-5) Open Open Open N/A N/A N/A DRAM timing and control POST Check LAN Cable [Disabled] Enables or disables checking of the LAN/LAN2 cable during the Power-On SelfTest (POST). Configuration options: [Disabled] [Enabled] 2.4.
Memory Clock Frequency [Auto] Sets the memory clock frequency.
2.4.4 Chipset Advanced Phoenix-Award BIOS CMOS Setup Utility Chipset Frame Buffer Size ECC Spread Spectrum PCIE Spread Spectrum SATA Spread Spectrum HT Spread Spectrum RGB/TV Display TV Mode Support Select Menu [32M] [Auto] [Down] [Enabled] [Enabled] [Down] [Auto] [Disabled] Item Specific Help Select Frame Buffer Size for Onboard Graphic Frame Buffer Size [32M] Selects the frame buffer size for Onboard Graphic.
2.4.5 PCIPnP Advanced Phoenix-Award BIOS CMOS Setup Utility Select Menu PCIPnP Plug & Play O/S Primary Display Adapter x [No] [PCI-E] Resources Controlled By [Auto] IRQ Resources ** PCI Express relative itmes ** Maximum Payload Size [4096] Item Specific Help Select Yes if you are using a Plug and Play capable operating system Select No if you need the BIOS to configure non-boot devices Plug & Play O/S [No] When set to [No], the BIOS configures all the devices in the system.
IRQ-xx assigned to When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved] Maximum Payload Size [4096] Sets maximum TLP payload size for the PCI Express devices. The unit is byte. Configuration options: [128] [256] [512] [1024] [2048] [4096] 2.4.
OnChip IDE Channel0 [Enabled] Allows you to enable or disable the onchip IDE channel 0 controller . Configuration options: [Disabled] [Enabled] OnChip IDE Channel1 [Enabled] Allows you to enable or disable the onchip IDE channel 1 controller . Configuration options: [Disabled] [Enabled] IDE DMA transfer access [Enabled] Allows you to enable or disable the IDE DMA transfer access. Configuration options: [Disabled] [Enabled] SATA Port 1, 2 [Enabled] Allows you to enable or disable the SATA 1 and 2 ports.
First, Second, Third, Fourth SATA Master RAID [Disabled] Enables or disables the RAID function of the first, second, third or fourth SATA master drive. Configuration options: [Disabled] [Enabled] USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. Phoenix-Award BIOS CMOS Setup Utility Advanced USB Controller USB2.
Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto] Serial Port2 Address [2F8/IRQ3] Allows you to select the Serial Port2 base address. Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto] Parallel Port Address [378/IRQ7] Allows you to select the Parallel Port address.
2.5 Power menu The Power menu items allow you to change the settings for the Advanced Configuration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press to display the configuration options. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Exit ACPI Suspend Type [S1&S3] ACPI APIC support [Enabled] Select Menu Item Specific Help Select the ACPI state used for System Suspend. APM Configuration Hardware Monitor F1:Help ESC: Exit 2.5.
Restore on AC Power Loss [Disabled] Allows you to enable or disable the Restore on AC Power Loss function. Configuration options: [Disabled] [Enabled] HDD Down In Suspend [Disabled] Configuration options: [Disabled] [Enabled] PWR Button < 4 secs [Instant-Off] Allows you to set the event after the power button is pressed for more than 4 seconds.
Alarm Time (hh:mm) [Disabled] To set the time of alarm: 1. Highlight this item and press to display a pop-up menu for the hour field. 2. Key-in a value (Min=0, Max=23), then press . 3. Press to move to the minutes field then press . 4. Key-in a minute value (Min=0, Max=59), then press . 5. Press to move to the seconds field then press . 6. Key-in a value (Min=0, Max=59), then press .
2.5.4 Hardware Monitor The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an item then press to display the configuration options. Power Phoenix-Award BIOS CMOS Setup Utility Hardware Monitor [Disabled] Q-Fan Controller Vcore Voltage [1.56V] 3.3V Voltage [3.18V] 5V Voltage [5.05V] 12V Voltage [11.
2.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press to display the sub-menu. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit Select Menu Boot Device Priority Removable Drives Hard Disk Drives Item Specific Help Press [Enter] to Set. CDROM Drives Boot Settings Configuration Security F1:Help ESC: Exit 2.6.
2.6.3 Hard Disk Drives Phoenix-Award BIOS CMOS Setup Utility Boot Hard Disk Drives 1. Bootable Add-in Cards: XXXXXXXXX Select Menu Item Specific Help 1. Bootable Add-in Cards Allows you to assign bootable add-in cards attached to the system. 2.6.4 CDROM Drives Phoenix-Award BIOS CMOS Setup Utility Boot CDROM Drives Select Menu Item Specific Help 1. 2nd Slave: XXXXXXXXX 1. 2nd Slave: XXXXXXXXX Allows you to assign CDROM drives attached to the system. 2.6.
Case Open Warning [Enabled] Enables or disables the chassis open status feature. Setting to Enabled, clears the chassis open status. Refer to section “1.10.2 Internal connectors” for setting details. Configuration options: [Disabled] [Enabled] Quick Boot [Enabled] Allows you to enable or disable the system quick boot feature. When Enabled, the system skips certain tests while booting.
Full Screen LOGO [Enabled] Allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Make sure that the above item is set to [Enabled] if you want to use the ASUS MyLogo™ feature. Halt On [All, But Keyboard] Allows you to error report type.
2.6.6 Security Phoenix-Award BIOS CMOS Setup Utility Boot Boot Settings Configuration Supervisor Password Clear User Password Clear Password Check [Setup] Select Menu Item Specific Help Supervisor Password User Password These fields allow you to set passwords: To set a password: 1. Select an item then press . 2. Type in a password using a combination of a maximum of eight (8) alphanumeric characters, then press . 3.
Password Check This field requires you to enter the password before entering the BIOS setup or the system. Select [Setup] to require the password before entering the BIOS Setup. Select [System] to require the password before entering the system.
2.7 Tools menu The Tools menu items allow you to configure options for special functions. Select an item then press to display the sub-menu. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit Select Menu ASUS O.C. Profile EZ Flash 2 Item Specific Help Press [Enter] to Set. F1:Help ESC: Exit 2.7.1 ↑↓ : Select Item →←: Select Menu -/+: Change Value Enter: Select SubMenu F5: Setup Defaults F10: Save and Exit ASUS O.C.
3. 4. 5. Enter BIOS setup program. Go to the “Tools” menu to select “Load from File”. Press then the setup screen will appear. Press to switch between drives before the correct “xxx.CMO” file is found. Then press to load the file. A pop-up message will inform you when the loading process finishes. • • Suggest only to update the BIOS file coming from the same memory/CPU configuration and BIOS version. Only the “xxx.CMO” file can be loaded.
ASUSTek O.C. Profile Utility B311 Current CMOS BOARD: M2NPVVM VER: 0122 DATE: 04/24/2006 Update CMOS BOARD: Unknown VER: Unknown DATE: Unknown PATH: C:\M2NPVOC WIN98SEis done! Press any key to Exit.
CMOS backup NETTERM DOCUME”1 PROGRA”1 SYSTEM”1 M2NPVVM RECYCLED TEST-REB BOOTFONT.BIN 213830 2001-09-05 20:00:00 Note [Enter] Select [Y] Yes [N/Esc] No [Left/Right]: Switch The BIOS file will be saved as “xxx.CMO”. 2.7.2.8 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Main Advanced Power Phoenix-Award BIOS CMOS Setup Utility Boot Tools Exit Exit & Save Changes Exit & Discard Changes Load Setup Default Discard Changes F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu Select Menu Item Specific Help This option save data to CMOS and exiting the setup menu.
Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press , a confirmation window appears. Select YES to load default values. Select Exit & Save Changes or make other changes before saving the values to the non-volatile RAM. Discard Changes This option allows you to discard the selections you made and restore the previously saved values. After selecting this option, a confirmation appears.
This chapter describes the contents of the support CD that comes with the motherboard package.
3.1 Installing an operating system This motherboard supports Windows® 2000/XP operating systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. 3.2 • Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for reference only. Refer to your OS documentation for detailed information.
3.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Installation Wizard for Drivers Launches the ASUS InstallAll driver installation wizard. NVIDIA nForce Chipset Driver Installs the NVIDIA® nForce™ Chipset Driver program. NVIDIA GeForce 6150 GPU Driver Installs the NVIDIA® GeForce 6150 graphics processing unit (GPU) driver.
3.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll - Installation Wizard for Utilities Launches the ASUS InstallAll utilities installation wizard. ASUS PC Probe II This smart utility monitors the fan speed, CPU temperature, and system voltages, and alerts you of any detected problems. This utility helps you keep your computer in healthy operating condition.
Microsoft DirectX 9.0c The Microsoft® DirectX® 9.0c is a multimedia technology that enhances computer graphics and sounds. DirectX® improves the multimedia features of your computer so you can enjoy watching TV and movies, capturing videos, or playing games on your computer. Microsoft® Windows® XP Service Pack 2 already includes Microsoft® DirectX® 9.0c. If your system is Microsoft® Windows® XP Service Pack 2‑embedded, skip Microsoft® DirectX® 9.0c installation.
NVIDIA® 64bit SATA RAID Driver Allows you to create an NVIDIA® Serial ATA (SATA) RAID driver disk for a 64-bit system. 3.2.5 Manual menu The Manual menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening a user manual file.
3.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. 3.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support CD. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard.
Browse this CD Displays the support CD contents in graphical format. Technical support Form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support. Filelist Displays the contents of the support CD and a brief description of each in text format.
