Specifications

2-26 Chapter 2: Hardware information
5. USB connectors (10-1 pin USB56, USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specication that supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
6. IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for a IEEE 1394a port. Connect the IEEE 1394a module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage
the motherboard!
R
M2N-TE
M2N-TE USB 2.0 Connectors
GND NC
GND
USB78
USB+5V USB_P8- USB_P8+
USB+5V
USB_P7-
USB_P7+
1
USB56
USB+5V USB_P6 USB_P6 GND NC
USB+5V
USB_P5-
USB_P5+
GND
-
+
1
1
USB+5V USB_P10-
USB_P10+
USB+5V
USB_P9-
USB_P9+
GND
GND
USB910
NC
R
M2N-TE
M2N-TE IEEE 1394a Connector
IE1394_2
GND
+12V
TPB1-
GND
TPA1-
+12V
TPB1+
GND
TPA1+
1
The IEEE 1394 cable module is purchased separately.
The USB cable module is purchased separately.