Specifications

ASUS M2N-TE 2-25
4. JMicron JMB363
®
E Serial ATA connector (7-pin ESATA2)
This connector is for a Serial ATA signal cable. This connector supports a
Serial ATA hard disk drive.
The JMicron JMB363 controller item in the BIOS is set to [IDE] by default,
allowing you to enable the hot-plug function for the external device.
• Connect the right-angle side of the
SATA signal cable to the SATA device or
you may connect the right-angle side of the
SATA cable to the onboard SATA port to
avoid placement conict with huge graphics
cards.
• The Serial ATA signal cable is
purchased separately.
right angle side
Use only a Serial ATA cable with the totally length of not more than 1 meter.
R
M2N-TE
M2N-TE ESATA Connector
ESATA2
GND
RSATA _TXP1
RSATA _TXN1
GND
RSATA _RXP1
RSATA _RXN1
GND