Specifications
ASUS M2N-TE 1-3
Serial ATA I/II technology and SATA-On-The-Go
The motherboard fully supports the Serial ATA II 3.0 Gb/s technology through the
Serial ATA interfaces and the NVIDIA
®
nForce
®
550 MCP chipset. The Serial ATA 3
Gb/s specication provides twice the bandwidth of the current Serial ATA products
with a host of new features, including Nativa Command Queueing (NCQ), and
Power Management (PM) Implementation Algorithm. Serial ATA allows for thinner,
more exible cables with lower pin count and reduced voltage required. Leveraging
these Serial ATA 3.0 Gb/s features is the SATA-On-The-Go. Supported by the
JMicron Serial ATA RAID controller, two Serial ATA 3.0 Gb/s connectors (one at
mid-board and one on the rear panel) provide smart setup, and hot-plug function.
See pages 2-24 and 2-25 for details.
IEEE 1394a support
The IEEE 1394a interface provides high-speed and exible PC connectivity to
a wide range of peripherals and devices compliant to the IEEE 1394a standard.
The IEEE 1394a interface allows up to 400 Mbps transfer rates through simple,
low-cost, high-bandwidth asynchronous (real-time) data interfacing between
computers, peripherals, and consumer electronic devices such as camcorders,
VCRs, printers, TVs, and digital cameras. See page 2-26 for details.
S/PDIF digital sound ready
The motherboard supports the S/PDIF technology through the S/PDIF interfaces
on the rear panel. The S/PDIF technology turns your computer into a high-end
entertainment system with digital connectivity to powerful audio and speaker
systems.
USB 2.0 technology
The motherboard implements the Universal Serial Bus (USB) 2.0 specication,
dramatically increasing the connection speed from the 12 Mbps bandwidth on USB
1.1 to a fast 480 Mbps on USB 2.0. USB 2.0 is backward compatible with USB 1.1.
See page 2-26 for details.