User’s Manual

2-31
華碩 M2A-MX 主機板使用手冊
2.6.1 啟動裝置順序（Boot Device Priority）
2.6 啟動選單（Boot menu）
本選單可讓您改變系統啟動裝置與相關功能。
1st ~ xxth Boot Device [1st Floppy Drive]
本項目讓您自行選擇開機碟片並排列開機裝置順序。依照 1st、2nd、3rd
順序分別代表其開機裝置順序。而裝置的名稱將因使用的硬體裝置不同而有
所差異。設定值有: [xxxxx Drive] [Disabled]
2.6.2 啟動選項設定（Boot Settings Configuration）
Quick Boot [Enabled]
本項目可讓您決定是否要略過主機板的自我測試功能（POST），開啟本項
目將可加速開機的時間。當設定為 [Disabled] 時，BIOS 程式會執行所有的自
我測試功能。設定值有：[Disabled] [Enabled]。
Boot Settings
Boot Device Priority
Boot Settings Conguration
Security
Species the Boot
Device Priority
sequence.
A virtual oppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the rst boot
device.
Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [Hard Drive]
3rd Boot Device [ATAPI CD-ROM]
Species the Boot
sequence from the
available devices.
A device enclosed
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Boot Settings Conguration
Quick Boot [Enabled]
Full Screen Logo [Enabled]
AddOn ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait For ’F1’ If Error [Enabled]
Hit ’DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.