User’s Manual

2-31
華碩 M2A-MX 主板用戶手冊
2.6.1 啟動設備順序（Boot Device Priority）
2.6 啟動菜單（Boot menu）
本菜單可讓您改變系統啟動設備與相關功能。
1st ~ xxth Boot Device [1st Floppy Drive]
本項目讓您自行選擇啟動盤並排列開機設備順序。依照 1st、2nd、3rd 順
序分別代表其開機設備順序。而設備的名稱將因使用的硬件設備不同而有所
差異。設置值有: [xxxxx Drive] [Disabled]
2.6.2 啟 動 選 項 設 置 （ B o o t S e t t i n g s
Configuration）
Quick Boot [Enabled]
本項目可讓您決定是否要略過主板的自我測試功能（POST），開啟本項
目將可加速開機的時間。當設置為 [Disabled] 時，BIOS 程序會運行所有的
自我測試功能。設置值有：[Disabled] [Enabled]。
Boot Settings
Boot Device Priority
Boot Settings Conguration
Security
Species the Boot
Device Priority
sequence.
A virtual oppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the rst boot
device.
Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [Hard Drive]
3rd Boot Device [ATAPI CD-ROM]
Species the Boot
sequence from the
available devices.
A device enclosed
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Boot Settings Conguration
Quick Boot [Enabled]
Full Screen Logo [Enabled]
AddOn ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait For ’F1’ If Error [Enabled]
Hit ’DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.