Specifications

2-10 Chapter 2: Hardware information
3. Connect the CPU fan cable to the connector on the motherboard
labeled CPU_FAN1/CPU_FAN2.
2. Push down two fasteners at
a time in a diagonal sequence
to secure the heatsink and fan
assembly in place.
B
B
A
A
A
B
B
A
P5M2-M
®
P5M2-M CPU Fan Connectors
GND
FANPWR2
GND
FANPWR2
FAN_PWM
CPU_FAN2
CPU_FAN1
FAN_PWM
• Do not forget to connect the CPU fan connector! Hardware
monitoring errors can occur if you fail to plug this connector.
• If there is only one CPU fan cable, connect it to the connector
labeled CPU_FAN1. Failure to do so may cause hardware monitoring
errors. Set the CPU fan pin selection jumper to use a 3-pin or 4-pin
fan cable plug. Refer to “2.6 Jumpers” for deatails.