Specifications
4-30
Chapter 4: BIOS setup
Re sto re On AC Po wer Lo ss [La st Sta te]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss.
Conguration options: [Power Off] [Power On] [Last State]
Re sum e B y R ing [D isa ble d]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Conguration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the rst
try. Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.
Re sum e O n L AN [Di sab led ]
When set to [Enabled], this parameter allows you to turn on the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead.
Conguration options: [Disabled] [Enabled]
Re sum e B y P ME# [D isa ble d]
When set to [Enabled], this parameter allows you to turn on the system through a
PME# device. This feature requires an ATX power supply that provides at least 1A
on the +5VSB lead.
Conguration options: [Disabled] [Enabled]
Po wer On By PS /2 Key boa rd [Di sab led ]
Allows you to use specic keys on the keyboard to turn on the system. This
feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Conguration options: [Disabled] [Enabled]
Po wer On By PS /2 Mou se [Di sab led ]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on
the system. This feature requires an ATX power supply that provides at least 1A on
the +5VSB lead. Conguration options: [Disabled] [Enabled]