Specifications

ASUS P5M2 Series

2-37

14. Au xil iar y p ane l c onn ect or (20 -pi n AUX_PA NEL 1)

This connector is for additional front panel features including front panel

SMB, locator LED and switch, chassis intrusion, and LAN LEDs.

Front Panel SMBus (6-1 pin)

These leads connect the front panel SMBus cable.

LAN link activity LED (2-pin LAN1_LINKACTLED and 2-pin LAN1_

LINKACTLED)

Both of the 2-pin connectors are for the LAN1 and LAN2 Activity LED.

Connect the LAN Activity LED cable to this connector.

This LED blinks during a network activity and is always lit when linked.

Chassis Intrusion connector (4-1pin CASEOPEN)

This lead is for a chassis with an intrusion detection feature. This

requires an external detection mechanism such as a chassis intrusion

sensor or microswitch. When you remove any chassis component, the

sensor triggers and sends a high-level signal to this lead to record a

chassis intrusion event. The defaults setting is to place one jumper cap

over the CASEOPEN and GND leads for disabled this feature.

Locator LED (2-pin LOCATORLED1 and 2-pin LOCATORLED2)

Both of the 2-pin connector is for the Locator LED 1 and LED 2. Connect

the Locator LED cable to this 2-pin connector.

This LED lights up when the Locator button is pressed.

Locator Button/Switch (2-pin LOCATORBTN)

This connector is for the locator button. This button queries the state of

the system locator.