Specifications
ASUS P5M2 Series
2-31
4. Har d d isk ac tiv ity LE D c onn ect or (4- pin HD LED 1)
This connector supplies power to the hard disk activity LED. Connect the
external LED on the storage card like SCSI card with the onboard HDLED1to
allow the access signals to got through the HDLED pin on the system panel
connector.
5.
USB co nne cto r ( 10- 1 p in USB 34)
This connector is for USB 2.0 ports. Connect the USB module cable to
this connector, then install the module to a slot opening at the back of the
system chassis. This USB connector complies with USB 2.0 specication that
supports up to 480 Mbps connection speed.
The USB port module is purchased separately.
P5M2 Series
®
P5M2 Series SCSI/SATA Card Activity LED Connector
#
HDLED 1
PIN 1
ADD_ IN_ CARD_ACT
#ADD_ IN_ CARD_ACT
NC
NC
P5M2 Series
®
P5M2 Series USB 2.0 Connector
USB +5V
USB _P 4-
USB _P 4+
GND
NC
USB 34
USB +5V
USB _P 3-
USB _P 3+
GND