Specifications

5-48
Chapter 5: RAID configuration
4. To remove the boot designator, move the cursor to the disk and press Alt+B.
This controller will no longer have a disk designated as boot.
5. To change the boot disk, move the cursor to the new boot disk and press
Alt+B. The boot designator will move to this disk.
The rmware must be congured correctly in order for the Alt+B feature to
work.
5.5.6 Global_Properties
From the Setup Utility screen, press <Ctrl+C) to enter the LSI Logic Conguration,
then select Global Properties. The Global Properties menu allows you to change
related settings.
Pa use Wh en Boo t Alert Displayed
Sets whether to pause when the boot alert displays. Conguration options: [Yes]
[No]
Esc=ExitMenuF1/Shift+1=Help
Allt+N = Global Properties -/+ = Alter Boot Order Ins/Del = Alter Boot List
LSILogicCongUtilityv6.08.05.00(2006.08.02)
Adapter List Global Properties
Adapter PCI PCI PCI PCI FW Revision Status Boot
BUS Dev Fnc Slot
SAS1068 050300001.15.00.00-IRDisabled0
Esc=ExitMenuF1/Shift+1=Help
Allt+N = Adapter List -/+ = Change Item
LS I  Lo gi c  Co nf i g U ti l it y             v 6 . 0 8 . 0 5 . 0 0  (2 0 0 6 . 0 8 . 0 2 )
Adapter List Global Properties
Pause When Boot Alert Displayed [No]
Boot Information Display Mode [Displayadapters&installeddevices]
Support Interrupt [Hookinterrupt,theDefault]
Restore Defaults