Specifications

ASUS P5M2 Series
5-43
Ma nag ing ho t s par es
You may congure one disk as a global hot spare to protect critical data on the
IM/IME volume(s). You may create the hot spare disk at the same time you create
the IM/IME volume. Refer to this section when adding a hot spare on an existing
volume.
If a disk on IM/IME volume fails, the utility automatically rebuilds the failed disk
data on the hot spare. When the failed disk is replaced, the utility assigns the
replacement as the new hot spare.
To create a hot spare
1. Follow steps 1 ~ 3 of section “Viewing Volume Properties”.
2. From the
View Array screen, select Manage Array, then press <Enter>.
3. From the
Manage Array screen, select Manage Hot Spare, then press
<Enter>.
Esc=ExitMenuF1/Shift+1=Help
Enter=SelectItemAlt+N=NextArrayC=Createanarray
LSILogicCongUtilityv6.08.05.00(2006.08.02)
View Array -- SAS1068
Array Type 1 of 1
Identier  LSILOGICLogicalVolume3000
Type IME
Scan Order 0
Size(MB)  51498
Status Optimal
Manage Array
SlotDeviceIdentierRAIDHotDrivePredSize
Num   DiskSprStatusFail(MB)
0SEAGATEST373454SS0003YesNOOkNo34331
2SEAGATEST373454SS0003YesNOOkNo34331
3SEAGATEST373454SS0003YesNOOkNo34331
Esc=ExitMenuF1/Shift+1=Help
Enter = Select Item
LS I  Lo gi c  Co nf i g U ti l it y             v 6 . 0 8 . 0 5 . 0 0  (2 0 0 6 . 0 8 . 0 2 )
Manage Array -- SAS1068
Identier  LSILOGICLogicalVolume3000
Type IME
Scan Order 0
Size(MB)  51498
Status Optimal
Manage Hot Spare
Synchronize Array
Activate Array
Delete Array